Meaning
Simulation algorithms evaluate high-pressure melt compensation during the post-filling stage of injection moulding to predict volumetric shrinkage and cavity pressure distribution. Performing a packing analysis enables mould designers to optimize packing pressure profiles and hold times before cutting steel. This engineering calculation governs sink mark formation and volumetric shrinkage distribution across complex part geometries.
The simulation boundary covers the post-filling pack and hold phase, terminating once the mold gate solidifies completely.
Pressure Compensation
Applied packing pressure forces additional polymer melt into the mold cavity to offset volumetric shrinkage as the plastic cools. Numerical solvers calculate localized pressure drops, density changes and material flow through freezing runner channels. When packing pressure drops too rapidly, sink marks and void formations appear in thick structural sections.
Excessive packing pressure causes flash formation at parting lines and induces high residual stress near the sprue. Precise timing of the packing phase prevents gate backflow while avoiding unnecessary cycle time extensions.
Shrinkage Control
Computer predictions identify localized volumetric shrinkage variations that lead to part warpage after ejection. Engineers modify wall thickness transitions and runner sizes based on packing pressure gradient results.
Optimization Limit
Packing analysis results depend directly on accurate pressure-volume-temperature material data and accurate tool thermal boundary conditions.