Meaning
Multi-directional strength tests measure the ability of a plastic part to withstand sudden loads from various angles. A multi axial impact evaluation applies a force that propagates radially from the point of contact, simulating real-world collisions on molded housings.
Stress Distribution
Biaxial tension creates a complex stress state that accelerates brittle failure in susceptible materials. The polymer must yield in multiple directions simultaneously, preventing the chains from orienting in a single direction to resist the load. This test reveals hidden structural weaknesses such as weld lines or gating defects.
Specimen Response
Puncture energy values reflect the tough-to-brittle transition behavior of the tested compound. Ductile failures produce a clean hole with drawn plastic edges, while brittle failures result in radial cracks or shattering of the specimen. This distinction helps design engineers specify material thicknesses for protective enclosures.
Test Operation
Pneumatic clamping secures the test specimen to ensure that only the dynamic load of the impactor influences the result. Adjusting the velocity of the weighted probe simulates different drop heights or crash conditions. The generated data assist in comparing the relative performance of different resin grades during high-speed collisions by providing a continuous record of the force applied to the test piece.