Meaning
Evaluation of a completed plastic assembly through controlled free fall onto a rigid surface establishes the structural viability of the part under sudden impact. Drop testing measures the resistance of moulded thermoplastic housings to cracking or internal boss fracture. The evaluation applies to protective enclosures and transport packaging, ending when the structure suffers functional impairment.
Mechanical Verification
Dynamic strain gauges attached to the specimen register the transient shock response during the impact event. Moulders utilise drop testing to verify that assembled resin shells survive accidental drops from a designated height, typically set by international shipping standards. The data gathered provides a quantitative benchmark of part toughness that raw material datasheets cannot replicate.
Because the stress distribution during a fall is highly complex, multiple drop orientations must be evaluated to ensure uniform structural integrity across the entire surface.
Process Influence
Moulding conditions directly dictate the impact performance of the finished part by setting the level of molecular orientation. High melt temperatures generally reduce molded-in stress, which improves the durability of the component during drop testing. Conversely, excessive regrind content creates brittle regions that fail prematurely.
Failure Analysis
Brittle fractures along weld lines or sharp internal radii represent the most common mode of component destruction. When a moulded part hits the ground, the impact energy concentrates at these geometric discontinuities, causing rapid crack propagation. Designers resolve these failures by increasing the radius of internal corners or moving gate locations to position weld lines away from high-stress areas.