Meaning
A critical process threshold defines the moment or location where water vapor moves between a polymer and its surrounding environment. The moisture transfer point dictates whether a resin absorbs ambient humidity or releases its internal moisture during the drying phase. This boundary is governed by relative humidity and temperature, stopping when the material reaches equilibrium.
Drying Efficiency
Sufficiently drying hygroscopic resins like nylon or polyethylene terephthalate is necessary before melt processing. If the polymer remains below the moisture transfer point for its environment, it continues to absorb moisture, leading to hydrolytic degradation during moulding. Dryers must heat the air and lower the dew point to shift this threshold.
This shift forces moisture out of the pellet.
Defect Prevention
Failure to control this parameter leads to severe part defects and degraded mechanical properties. When wet resin enters the injection barrel, the trapped water vaporises and creates silver streaks on the part surface, a defect known as splay. Beyond cosmetic issues, hydrolysis cleaves the polymer chains, which reduces the impact strength of the molded component.
Monitoring the moisture transfer point ensures the material maintains its molecular weight.
Process Monitoring
Moulders use online sensors to track the moisture levels in the hopper. This real-time analysis prevents wet material from reaching the screw, safeguarding production quality.