Meaning
Relative alteration in crystallographic unit cell dimensions caused by internal or externally applied mechanical stress. In semi-crystalline polymer moulding, lattice strain reflects local interatomic spacing changes resulting from gate packing pressure, thermal gradients, and frozen-in molecular chain orientation. Diffraction techniques quantify this distortion without sectioning the plastic component.
Molecular Orientation
Rapid cooling during injection moulding traps oriented polymer chains under non-equilibrium elastic tension. High cavity pressure forces crystallites into strained configurations, producing measurable lattice strain within crystalline lamellae. Distinguishing microstructural strain from gross physical part distortion allows polymer engineers to isolate packing pressure effects from thermal shrinkage mechanisms across complex part geometries.
Adjusting hold duration alters these internal microstructural strain states directly.
Thermal Contraction
Cooling rate variations between mold cavity walls and internal core layers create steep thermal stress gradients during solidification. Surface layers solidify under low pressure, while core regions solidify under high holding pressure, generating differential lattice strain profiles across the wall thickness. These localized internal strain variations cause post-moulding stress relaxation, leading to dimensional drift during storage or elevated-temperature service.
Warpage Control
Achieving tight dimensional tolerances requires aligning processing parameters with internal strain limits. Datasheet mechanical properties provide bulk averages, but peak lattice strain determines local yielding and long-term creep performance in structural plastic parts. Controlling hold pressure and mold cooling rates suppresses excess internal strain, preventing premature environmental stress cracking and post-moulding part warpage.