Meaning
Optimal flow rate limits for filling a mold cavity define the range of piston speeds that produce defect-free parts without degrading the polymer. Navigating the injection velocity window requires balancing the shear thinning effects of the resin against the risks of thermal degradation and shear burning. This range depends on gate geometry, wall thickness and polymer viscosity.
Operating outside this range results in cosmetic or structural flaws.
Flow Rate Constraint
Low fill speeds run the risk of premature solidification before the cavity is filled, which causes short shots and poor weld line strength. High fill speeds can cause jetting and severe shear heating, which degrades the molecular structure of the polymer. The lower limit is governed by the cooling rate of the resin, while the upper limit is dictated by the thermal stability of the melt.
Finding the balance requires analyzing viscosity changes at various shear rates.
Process Setting
Processors determine the injection velocity window by running viscosity curves to locate the region where viscosity becomes less sensitive to shear rate changes. This stable region allows consistent cavity filling even with minor variations in resin batch viscosity. It ensures the mold fills before gate freeze occurs.
Stabilizing the fill speed reduces variation in part weight.
Quality Impact
Shrinkage and surface appearance remain consistent when production runs within the designated speed limits. Variations in speed can alter the orientation of the polymer chains, which affects mechanical properties. Maintaining the velocity avoids the need for excessive holding pressures.