Meaning
Solidification analysis identifies the time required for the polymer melt at the narrowest point of the flow path to freeze completely. Engineers determine the gate freeze duration to establish the minimum pack and hold time necessary to prevent molten plastic from backflowing out of the cavity. If the injection pressure is released before this solidification occurs, the melt will flow back into the runner system, causing sink marks and dimensional shrinkage.
Thermal Transition
Crystalline and amorphous polymers transition from a fluid state to a solid state at different rates depending on their thermal properties. Gate size, cooling water temperature, and melt temperature all dictate the speed of this local phase change. Adjusting the cooling layout around the gate area allows for precise control of this solidification process.
Part Weight
Determining this timing involves running a series of weight trials at increasing hold times while maintaining all other process variables constant. Part weight increases steadily with hold time until the gate freezes, at which point the weight curve becomes flat. This flat region defines the optimized hold time setting for the injection moulding machine.
Production Speed
Minimizing the hold time to match this transition point maximizes output by preventing unnecessarily long cycles. Setting the hold time shorter than this duration creates dimensional instability.