Meaning
A mechanical separation process positioned within a polymer melt stream removes solid particulates or degraded gels prior to shaping. Extrusion and recycling systems force molten polymer through metal screen packs or continuous filter plates to trap contaminants that would otherwise compromise part surface finish or mechanical integrity. Filtration cleanses the molten polymer, ensuring that crosslinked species do not enter thin-walled mould cavities or fiber spinning nozzles.
The operation operates within molten plastic processing lines and does not apply to dry powder blending or cold material handling.
Pressure Drop
Contaminants collecting on filter screens restrict open flow area, generating a continuous rise in head pressure upstream of the breaker plate. As the filter cake builds, backpressure inside the extruder barrel increases, altering barrel shear and volumetric output. Monitoring this pressure rise indicates screen clogging, signaling the need for automated screen changes or manual filter replacements to prevent process instability.
Contaminant Retention
Screen mesh size governs the minimum size of debris retained during processing. Fine meshes trap sub-micron carbon specks and tiny crosslinked gels, but fine screens clog quickly when processing contaminated post-consumer regrind. Coarse screens allow high throughput with minimal pressure buildup, yet permit larger particles to pass through into finished products.
Economic Penalty
Operating melt filters adds operational costs through hardware investment, screen media consumption, and lost material during screen changes. High contaminant loads force frequent filter cycles, generating purge waste and causing pressure fluctuations that lead to wall thickness variations in extruded profiles. Balancing screen mesh size against material purity requirements prevents unnecessary scrap while maintaining part quality.