Meaning
A standardized microbiological or chemical trial evaluates the barrier performance of recycled polymeric materials intended for food-contact applications. The FDA challenge test establishes whether a recycling process can reliably remove contaminants to a level below the threshold of regulatory concern. This procedure involves deliberately spiked post-consumer flake that is run through the recycling extruder to measure the cleaning efficiency of the system.
Spiking Protocol
Inoculating the polymer source with specific chemical surrogates represents the first stage of the evaluation. These surrogates mimic the physical properties of typical contaminants like solvents or oils. The recycled resin must reduce the concentration of these surrogates by a specified percentage to receive a non-objection letter for food packaging use.
Analytical testing via chromatography determines the residual levels after the run.
Extrusion Impact
Thermal history and vacuum levels during reprocessing dictate the volatile removal efficiency of the recycling system. A high-vacuum decontamination step during the FDA challenge test represents the primary mechanism for pulling the low-molecular-weight surrogates out of the polymer melt. Underperforming vacuum pumps or low melt temperatures can lead to test failure.
When this occurs, the recycler must adjust the process parameters or run a longer decontamination cycle to achieve the necessary purification.
Compliance Boundary
The test protocol only applies to specific polymers and food types. For example, a validation for dry-food contact does not authorize the resin for high-temperature liquid packaging.