Meaning
Injection moulding pressure differentials define the mechanical energy consumed as a molten polymer stream flows from the gate to the furthest flow length of a mould cavity. Friction along wall surfaces and progressive resin cooling generate a drop in force, establishing the cavity pressure loss experienced within a tool. This drop determines whether adequate packing force reaches distal end-of-fill regions before the polymer gate freezes shut.
Standard material datasheets report melt flow rates under open orifice conditions, whereas actual processing encounters channel geometry constraints that lower delivered pressure.
Hydraulic Gradient
Melt viscosity and flow path ratio control the pressure drop along the mold cavity length. When cavity pressure loss becomes excessive, the machine hits its pressure limit before achieving full volumetric packing.
Viscous Resistance
Frictional heating during high-velocity injection alters local viscosity, changing the pressure decay curve inside thin-walled sections. Regrind materials containing thermal degradation products display inconsistent viscosity curves, which unpredictably alters cavity pressure loss from cycle to cycle. Polymer molecules align under shear, altering local flow resistance as the front moves.
Cold mold walls pull heat rapidly from the melt, thickening the stationary frozen layer and narrowing the effective flow channel.
Quality Impact
Inadequate force at the end of fill leads to localized volumetric shrinkage, sink marks and short shots. When cavity pressure loss exceeds design thresholds, toolmakers must widen channels or add gates to achieve uniform density. Dynamic transducer monitoring during fill phase confirms whether cavity pressure loss stays within allowed process limits.