Meaning
A contract manufacturer holding physical possession of production tooling belonging to a client operates as the temporary custodian of that property. The bailee is legally bound to store, maintain, and run the injection mould according to agreed manufacturing parameters. This custody remains limited to the production of approved polymer parts, with no transfer of underlying ownership.
When the production run concludes, the tool must be returned.
Custodial Responsibility
Preserving the integrity of the mould base, the manifold, and the core pins is a fundamental obligation of the contract manufacturer. As a bailee, the moulding shop must implement preventive maintenance programs that include regular grease application, channel descaling, and cavity polishing. Failure to protect the mould from moisture and corrosive outgassing of resins like polyvinyl chloride can result in severe legal and financial liabilities.
The custodian cannot use the tool for other customers or modify its gating system without written consent from the owner.
Process Risk
Operating high-pressure injection equipment involves inherent hazards that can damage complex steel tooling. If a bailee runs the mould outside the specified clamp force or allows a part to stick during ejection, a sudden clamping action can crush the core pins or scour the cavity surface. Such damage from improper setup or neglected safety interlocks constitutes a breach of the custodian’s duty of care.
The moulding shop must carry adequate insurance to cover the replacement cost of the tooling and the business interruption losses of the brand owner. This responsibility requires the custodian to log every moulding cycle and track any manual interventions on the shop floor, creating a verifiable record of tool treatment.
Return Protocol
The safe return of the tool at the end of the manufacturing agreement terminates the custodial relation. The bailee must perform a final dry cycle, apply protective anti-rust spray to all polished steel surfaces, and pack the assembly securely for transport. Any auxiliary components, including hot runner controllers, limit switch cables, and spare cavity inserts, must accompany the tool.
Upon receipt and successful toolroom inspection by the owner, the custodian’s legal responsibility for the physical asset ends.