Meaning
Fluid distribution in coextrusion dies often takes the form of concentric layers moving through a circular gap. This coaxial movement of polymer melts is referred to as annular flow, occurring primarily during the production of blown film, pipe extrusion, and multilayer blow moulding. High-viscosity resin travels along the outer wall of the die while a gas or a second polymer core occupies the center.
Maintaining uniform velocity across this circular cross-section is necessary to avoid wall thickness variations in the final product. Moulders regulate the die gap and land length to stabilize this distribution against shear-thinning effects.
Process Control
Temperature differences across the die geometry alter the viscosity of the flowing polymer. When melt temperature varies by even a few degrees, annular flow becomes asymmetric because the lower-resistance path draws more volume. Continuous pressure monitoring along the flow channel detects these localized deviations before they cause visible defects.
Melt Stability
Improper channel dimensions or incorrect shear rates trigger flow instabilities. These instabilities disrupt annular flow, which generates surface waviness in coextruded layers.
Quality Consequence
Uncontrolled thickness distribution represents a major cost driver in industrial packaging production. When annular flow degrades, thin spots emerge in the polymer tube, which lowers the puncture resistance of the finished film. High scrap rates result from these defects, forcing moulders to discard off-spec material that cannot easily be blended back as regrind.