Meaning
A specialized crystalline microstructure sometimes forms at the interface between a polymer matrix and a reinforcing fiber or mold wall. This interface-induced structure is known as trans-crystallinity, occurring when a high density of nucleating sites triggers crystal growth perpendicular to the boundary surface. The resulting densely packed crystal layer differs from the bulk spherulitic structure of the polymer.
This layer improves stress transfer between the matrix and the reinforcement, increasing composite strength.
Process Conditions
Specific cooling profiles and shear stresses during moulding promote the development of this crystalline layer. When shear is applied at the interface, trans-crystallinity forms more readily because polymer chains are aligned along the boundary. Moulders control this alignment by adjusting melt temperatures and cooling rates.
Mechanical Benefit
Fiber-reinforced composites exhibit higher tensile and flexural properties when a strong interfacial bond is achieved. The formation of trans-crystallinity around the fibers prevents micro-cracks from propagating along the interface under mechanical load. This structural reinforcement improves the durability of injection-moulded automotive parts.
Boundary Conditions
Surface chemistry of the reinforcing fibers or the mould wall determines the nucleating efficiency. If the fiber surface lacks active sites, trans-crystallinity cannot develop and the composite relies solely on weaker mechanical interlocking. Chemical sizing or plasma treatment of fibers is often employed to promote this beneficial crystalline growth.