Meaning
Molecular packing voids within non-crystalline macromolecular segments define the unoccupied space available for conformational segmental motion. This amorphous free volume governs both the diffusion rate of low-molecular-weight species and the localized mobility that dictates mechanical ductility. When polymer chains pack inefficiently during rapid cooling, the resulting unoccupied space increases relative to the thermodynamic equilibrium state.
The property applies specifically to disordered chain segments, ceasing to govern transport or relaxation behavior within ordered, crystalline lattices.
Thermal Relaxation
Physical aging drives the spontaneous densification of disordered chains toward equilibrium over extended storage intervals. During this relaxation, amorphous free volume contracts as kinetic chain mobility gradually dissipates thermal history. Injection moulded parts held below glass transition temperatures exhibit embrittlement and higher yield stress as voids shrink.
Reheating above the transition point resets the void fraction to its equilibrium baseline.
Gas Permeation
Transport properties of semi-permeable packaging barriers depend directly on the cross-sectional area of transient voids between polymer backbones. In barrier films, amorphous free volume establishes the percolation pathway through which oxygen and moisture migrate. Lower void fractions obtained by orientation reduce permeation rates without altering resin chemistry.
Regrind fractions often display shifted permeation profiles due to chain scission altering packing density.
Moulding Shrinkage
Volumetric contraction during cooling in injection moulding tools stems from the rapid collapse of intermolecular space before vitrification arrests chain rearrangement. Rapid cooling cycles freeze an excess of amorphous free volume into thin-walled mouldings, which reduces immediate part shrinkage at the expense of post-mould dimensional stability. Higher packing pressures force chains together, suppressing retained voids and yielding tighter dimensional tolerances across production batches.
Tool temperature adjustments alter the rate of void retention and directly dictate sink mark formation. Processors manipulating hold time observe direct shifts in part density as packing pressure forces chains into tighter configurations.