Meaning
Solid matter remains after a liquid carrier or solvent is completely evaporated under controlled thermal conditions. For high-purity plastic components, total non volatile residue measures the amount of soluble contamination present on the surface. This includes oils, waxes, unreacted monomers and mould release agents that could leach out during use.
It is a mandatory specification for medical devices and aerospace housings.
Surface Cleanliness
Measurement involves rinsing the part with a high-purity solvent and then weighing the solids that remain after the solvent is removed. High levels of residue suggest that the cleaning process in the cleanroom is failing or that the resin contains excessive low molecular weight additives.
Contamination Boundary
Contamination limits do not distinguish between different types of solids, providing only a total mass of the extracted material. It is a broad indicator of purity rather than a specific chemical analysis.
Evaporative Analysis
Precise temperature control during the drying phase is necessary to ensure that only the solvent is lost. If the temperature is too high, some of the residue itself might volatilize, leading to an underestimation of the contamination. Consistent laboratory protocols allow for the comparison of results across different production lots and suppliers.