Meaning
Friction mechanism represents the static resistance that must be overcome to initiate relative motion between two contacting surfaces. In polymer processing, stiction occurs when a cooled thermoplastic part adheres to the mold cavity wall or when a sliding core hesitates during tool opening. This adhesive force can lead to part deformation, surface blemishes, or broken ejector pins during the ejection phase.
Release Force
Overcoming this initial adhesive resistance requires higher ejection forces that can damage thin-walled moulded parts. When the ejector pins push against a stuck part, they can leave stress marks or punch through the plastic completely. To minimize this risk, molders apply release agents or use surface coatings like chromium or titanium nitride on the tool steel.
These surface treatments lower the coefficient of friction and ensure a smooth release.
Slide Hesitation
Moving tool components like slides and lifters are highly susceptible to this static friction. When the slide hesitates, the mechanical timing of the tool is disrupted, which can lead to severe collision damage between the slide and the advancing core.
Surface Finish
High-polish cavity surfaces often increase this adhesion by creating a vacuum effect between the smooth plastic and the steel. Textured surfaces reduce the contact area and prevent this sticking behavior.