Meaning
Pipeline design uses standardized geometric ratios to ensure plastic pipes can withstand specific internal fluid pressures without failing. SDR 11 defines a standard dimension ratio where the outside diameter of the pipe is exactly eleven times the wall thickness.
Pressure Rating
Thicker pipe walls provide higher pressure resistance but reduce the internal flow area and increase the material cost per meter. A pipe marked as SDR 11 possesses a wall thickness that allows it to operate safely at high pressures, such as ten or sixteen bar depending on whether the polymer is polyethylene or polypropylene. This ratio remains constant across all pipe diameters, meaning that as the pipe size increases, the wall thickness must grow proportionally to maintain the same pressure rating.
Welding Performance
Joining these pipes requires butt fusion or electrofusion fittings that match the same dimension ratio to ensure a uniform melt zone.
Extrusion Control
Maintaining the wall thickness of these heavy-wall pipes requires precise cooling and sizing during the extrusion process. Pipe extruders use ultrasonic gauge monitoring to measure the wall thickness in real time, preventing excessive material usage while ensuring the pipe never falls below the minimum wall requirement.