Meaning
Thermal resistance is achieved within a molded polymer part by creating a high density of microscopic gas bubbles. This micro-void insulation reduces the thermal conductivity of the finished component while lowering its overall weight. It is commonly used in structural foam molding of appliances and automotive parts.
Thermal Barrier
Trapped gas pockets within the polymer matrix slow down the rate of conductive heat transfer. This micro-void insulation works because gas has a much lower thermal conductivity than the solid polymer resin. The smaller and more numerous the bubbles, the higher the insulation value of the molded wall.
An insulating structure prevents heat loss in heated fluid containers.
Density Reduction
Generating these tiny pockets reduces the amount of raw polymer needed to mold the part. This micro-void insulation allows manufacturers to lower material costs without sacrificing the outer dimensions of the component. The resulting weight reduction improves fuel efficiency in transportation applications.
The combination of insulation and weight makes it ideal for modern automotive trim pieces.
Molding Technique
Introducing a physical or chemical blowing agent into the melt during the extrusion or injection process generates the gas bubbles. This micro-void insulation requires precise control over cavity pressure to allow the gas to expand only after the melt enters the mold. Too little pressure causes premature foaming in the barrel, which leads to surface cosmetic defects.
Correct screw back-pressure keeps the gas dissolved in the melt until injection.