Meaning
Folded polymer chains form thin, plate-like structures that provide the fundamental building blocks of semi-crystalline morphology. These plates typically measure between ten and twenty nanometres in thickness and extend much further in the lateral dimensions. The arrangement of these structures determines the density, stiffness, clarity and chemical resistance of the finished plastic part.
This crystal form exists only within semi-crystalline resins and is absent in purely amorphous materials.
Nucleation Phase
Formation begins when the melt cools below its melting temperature and specific sites initiate the folding process. The rate of cooling directly dictates the thickness of the plates and the overall degree of crystallinity achieved in the mould. Rapid cooling leads to thinner plates and a more flexible part.
Slower cooling allows for more perfect chain folding and higher mechanical strength.
Mechanical Linkage
Tie molecules connect adjacent plates to one another through the intervening amorphous regions. These connections provide the bridge that allows the material to resist tensile loads without brittle separation.
Performance Impact
The arrangement of these plates influences the permeability of the polymer to gases and liquids. Denser packing of the structures creates a more tortuous path for molecules to pass through the material. This improves the barrier properties of the plastic for packaging applications.
Highly crystalline regions also provide the chemical resistance needed to withstand exposure to harsh environments.