Meaning
International standard that defines the procedures for fatigue testing of fibre reinforced plastic composites under tension, compression, or flexural loading. The document provides a framework for generating curves that plot the stress level against the number of cycles to failure. Adherence to iso 13003 ensures that fatigue data generated in different laboratories can be compared directly for material selection.
It covers the equipment requirements, specimen preparation, and the environmental conditions for the tests.
Test Methodology
Load control and strain control methods are both described within the standard to suit different application needs. For most polymer composites, a constant amplitude load is applied at a frequency low enough to prevent significant internal heating. If the specimen warms up too much, the failure might be caused by thermal softening rather than mechanical fatigue.
The standard requires monitoring of the specimen temperature to ensure the validity of the data.
Specimen Geometry
Shape of the test coupons must be carefully controlled to avoid premature failure at the grips or edges. Rough edges from machining can introduce notches that artificially lower the fatigue life of the sample. Following the guidelines in iso 13003 for specimen finishing ensures that the recorded data reflects the true material property.
This is especially important when comparing virgin resins to blends containing regrind, as contaminants can act as internal stress raisers.
Quality Assurance
Final data sets must include the stress ratio, the frequency, and the failure mode observed during the test. Providing this level of detail allows design engineers to understand the reliability of the material over millions of cycles.