Meaning
Solidification of the polymer core within the entry channel marks the physical isolation of the mould cavity from the screw injection unit. Determination of the gate seal point establishes the exact hold time required to prevent melt backflow into the runner system. Once the gate freezes completely, additional packing pressure yields no further mass transfer into the cavity.
Premature pressure removal before reaching this transition causes sink marks, internal voids and high volumetric shrinkage. Datasheet processing guidelines provide baseline estimates, but actual seal timing depends on gate geometry, mould temperature and material thermal conductivity.
Weight Optimization
Sequential weigh studies identify the precise holding time necessary to achieve maximum part mass. Tracking part mass up to the gate seal point produces a characteristic curve that plateaus once the feed path freezes. Continuing hold pressure past this plateau wastes electrical energy and increases cycle time without altering component density.
Deviations in runner cooling or melt temperature shift the plateau position, altering part weight across production lots.
Thermal Conductivity
Heat transfer rate from the molten resin into the surrounding tool steel dictates how fast the feed entrance cools. Polymer formulations containing mineral fillers or glass fibers display elevated thermal conductivity, accelerating arrival at the gate seal point. Conversely, unfilled resins require longer hold times due to lower thermal diffusivity.
Consistent mould coolant flow maintains uniform steel temperatures, preserving predictable gate freezing intervals.
Internal Stress
Unnecessary packing pressure applied as the gate transitions to a solid state induces high localized shear stress around the entry area. Proper gate seal point timing minimizes residual stress, which prevents post-moulding stress cracking and dimensional distortion. Early depressurization allows backflow, creating stress gradients across the wall thickness.
Regrind additions change thermal properties slightly, requiring verification of seal timing whenever material blends change.