Meaning
Flow instability occurring when the polymer melt enters a cavity at high velocity without making contact with the mold walls. Visible surface blemishes and structural weak points are often the result of a gate jetting event. This phenomenon creates a snake-like stream of cooled resin that fills the center of the part before the rest of the cavity is packed.
Jetting Velocity
High injection speeds through a narrow orifice typically trigger the onset of this flow defect. Rapid cooling of the material in the open space occurs when gate jetting prevents stabilizing wall contact and reduces frictional heating. Moulders often observe that this leads to cloudy patches on the finished surface of clear or high-gloss parts.
Orifice Geometry
Adjusting the gate location or increasing the gate size can reduce the velocity of the incoming material to prevent the defect. Orifice geometry or profile injection speeds can be modified to stop gate jetting from forming. Directing the flow toward a pin or a wall immediately upon entry provides the necessary resistance to promote a laminar fountain flow.
Fusion Strength
Mechanical strength is compromised in areas where flow instabilities occur. Internal knit lines form at the interface of the cooled snake when gate jetting is present.