Meaning
Internal movement of bulk solids where a central core of material discharges while the periphery remains stationary creates a distinct flow pattern. In a storage vessel, funnel flow occurs when the hopper walls are not steep or smooth enough to induce mass flow. The material at the sides stays stagnant, forming a pipe or channel through which only the top-center material exits.
This behavior is common in shallow hoppers or when handling sticky resins and regrind.
Residence Distribution
Stagnant zones created by this flow pattern lead to highly inconsistent residence times for the resin pellets. Material near the walls can sit for days, while the material in the center passes through in minutes. This results in a blend of over-dried and under-dried resin reaching the injection unit.
Quality Cost
Molders experience fluctuating part quality when material history varies so wildly within a single batch. Under-dried resin causes splay and mechanical failure, while degraded resin from the stagnant zones introduces black specks and discoloration. These defects often appear intermittently, making them difficult to troubleshoot without a complete hopper purge.
Such disruptions increase the cost of quality by forcing additional inspection steps, high scrap rates, constant machine adjustments and increased labor costs that further destabilize the process.
Surface Finish
Friction between the polymer and the hopper wall determines the transition from mass flow to this erratic pattern. Polishing the internal surfaces or applying low-friction coatings can sometimes encourage the material to slide. However, the most reliable fix is usually a steeper wall angle designed specifically for the flow properties of the resin.