Meaning
A specific thickness or structure in multi-layer materials prevents the migration of contaminants from recycled layers into food-contact surfaces. In plastic packaging, the functional barrier limit ensures that hazardous substances, such as mineral oils or printing inks, remain below the threshold of detection during use. This limit is defined by the rate of chemical diffusion through the polymer matrix at a given temperature.
It dictates the minimum thickness required for the virgin inner layer of a recycled container.
Permeation Threshold
Chemical diffusion rate determines the time it takes for a contaminant to migrate through a plastic barrier. Under the permeation threshold of the term, the barrier layer must keep the concentration of migrating substances below ten parts per billion. This level of protection is necessary when using recycled polypropylene or polyethylene terephthalate in food packaging.
It guarantees that the recycled content does not compromise the safety of the packaged food.
Multi Layer Structure
Co-injection moulding processes create multi-layer plastic products with recycled cores and virgin skin layers. If the skin layer falls below the functional barrier limit, the recycled core material can release volatile organic compounds into the product. This failure is often caused by incorrect injection speed or unbalanced melt flows during the co-injection moulding cycle.
Manufacturers must measure and control the thickness of each layer across the entire part surface.
Moulding Design
Correct tooling design and process monitoring are essential to maintain the integrity of the barrier layer. If the gate location or the wall thickness is not optimized, the barrier layer can become too thin or tear during the filling phase. This defect defeats the functional barrier limit, exposing the food to contaminants from the recycled core.
Moulders can prevent this issue by using flow-simulation software to predict layer thickness and by conducting regular migration tests on the finished parts. Such a rigorous approach is critical for producing safe and sustainable consumer products.