Meaning
A gradual, systematic change in the efficiency of ion production occurs during continuous mass spectrometry analysis due to changes in capillary position or solvent evaporation. In plastic additive analysis, electrospray ionization drift can lead to inaccurate quantification of crucial processing aids and slip agents. This drift arises when polymer residues or non-volatile additives deposit on the spray tip or ion optics over time.
It can cause false reports of additive concentrations, which might lead to incorrect formulation adjustments.
Signal Degradation
Accumulation of oligomers and salts on the capillary orifice reduces the electrical field strength required for droplet formation. During the signal degradation of the term, the measured intensity of antioxidant compounds decreases even when their actual concentration in the polymer sample remains constant. This drop in sensitivity can lead to the false conclusion that a polymer batch has degraded or has been under-dosed.
Laboratories must run frequent rinse cycles to clear the capillary and restore normal signal levels.
Process Stability
Consistent mass spectrometer operation is required when monitoring large-scale compounding processes. If electrospray ionization drift remains uncorrected, the compounding line might produce batches with incorrect flame retardant or colorant levels. This variation can result in poor product quality or failure to meet fire safety standards.
Compounders use internal standards to normalize the signal and maintain process stability across multi-day production runs.
Additive Control
Accurate dosing of mould release agents prevents the molded parts from sticking to the core during ejection. When analytical testing is skewed by electrospray ionization drift, compounding facilities cannot verify that the correct amount of slip agent has been incorporated into the resin pellets. This lack of control causes parts to stick, which leads to pin push marks and longer cycle times.
Compounding plants must utilize reliable analytical methods to ensure the resin behaves predictably in the injection mould. High-quality analytics ensure that the physical properties of the polymer match the specification sheet precisely.