Meaning
Stress concentrations caused by geometric discontinuities reduce the dynamic load capacity of engineering structures under fluctuating mechanical stress. Component designers calculate the fatigue notch factor to quantify the reduction in endurance limit produced by thread roots and sharp corners in injection moulded parts. This empirical ratio compares the fatigue strength of an unnotched specimen directly against the fatigue strength of a notched specimen at a specific cycle count.
The factor applies specifically to cyclic stress fields and ceases to govern static tensile failure where yield redistributes stress.
Geometry Influence
Sharp internal radii in moulded plastic enclosures create localized stress peaks during cyclic flexure. The fatigue notch factor accounts for notch sensitivity, which varies between ductile polyamides and brittle filled polymers. Tooling designers increase rib root radii to lower local fatigue stress concentration and extend component field life.
Notch Sensitivity
Datasheet dynamic fatigue values measured on smooth ISO test bars fail to reflect part geometry containing gate marks or snap-fit undercuts. In glass-fiber reinforced polymers, fiber orientation near a notch alters the effective fatigue notch factor during cyclic bending. Regrind resin containing microvoids further elevates local stress concentration at sharp geometric transitions.
A high fatigue notch factor accelerates crack initiation at surface imperfections under repetitive working loads.
Tooling Threshold
Polymers with high notch sensitivity require generous fillets in structural regions to avoid sudden dynamic failure. Applying a realistic fatigue notch factor in component stress analysis prevents unexpected field fractures.