Meaning
Mechanical deformation extending beyond the elastic limit creates irreversible material displacement during repeated loading loops. In injection moulding tools and flexible polymer hinges, cyclic plastic strain accumulates across millions of production cycles until microcracks form. This irreversible strain amplitude governs low-cycle fatigue life in semi-crystalline polymers subjected to alternating mechanical stresses.
Boundary conditions for this phenomenon end where elastic recovery remains complete during stress unloading.
Hysteresis Accumulation
Polymers subjected to oscillating loads dissipate energy through internal molecular friction. Under cyclic plastic strain, localized heat generation softens the polymer matrix in living hinges or snap fits. Material yields at lower stress levels during subsequent cycles.
Cavity pressure spikes during packing exacerbate local strain accumulation in sharp tool corners.
Fatigue Lifespan
Datasheet tensile fatigue limits measured under monotonic tension fail to capture real moulding tool behavior. During high-speed moulding cycles, cyclic plastic strain induces strain softening in unfilled polyolefins and strain hardening in glass-filled resins. Recycled polymer blends containing uneven contaminant particles suffer accelerated microvoid formation under repeated strain loops.
The crack initiation phase consumes the majority of total component lifespan before sudden fracture occurs.
Failure Boundary
Moulded components operating within purely elastic deformation limits avoid permanent dimensional changes. Once cyclic plastic strain initiates, microstructural damage progresses until part wall separation occurs.