Meaning
An international technical standard defines the permissible dimensional variations and geometrical tolerances for industrially produced plastic moulded parts. Standard din en iso 20457 establishes tolerance series and target dimensions that account for resin shrinkage during cooling, cavity pressure distribution and mould construction variables. The standard applies strictly to injection moulding and compression moulding of thermoplastic and thermosetting materials, setting boundaries for quality acceptance between toolmaker and moulder.
It explicitly excludes unmachined profiles, blow-moulded containers, thermoformed sheets and foam parts where post-moulding expansion destabilizes reproducible geometry.
Tolerance Boundary
Shrinkage anisotropy creates directional deviation inside the mould cavity when polymer chains align along the fill path. Applying din en iso 20457 allows engineers to assign tolerance groups based on material stiffness and processing consistency. High-shrinkage semicrystalline resins require wider tolerance limits than amorphous polymers.
Moulding Deviation
Thermal contraction during the cooling phase generates dimensional variance across thick sections and rib intersections. Tooling dimensions must accommodate expected linear shrinkage, but post-moulding warpage can exceed nominal calculation when gate location produces uneven packing pressure.
Commercial Accord
Quality agreements rely on standardized tolerance classes to establish part acceptance criteria prior to steel cutting. When dimensional drift occurs on critical mounting features, inspection against specified tolerance groups dictates whether tool modification or process parameter tuning is required.