Meaning
An operational metric in optical polymer flake sorting measures the mass of acceptable polymer carried into the reject stream relative to the mass of targeted contaminant removed by pneumatic ejectors. The co-ejection ratio defines yield efficiency when separating post-consumer polymers like polyethylene terephthalate from unwanted polyvinyl chloride or polyolefin fractions. Excessively high values indicate wide nozzle blasts or improper valve timing, carrying valuable flake into target waste bins during high-throughput cleaning runs.
Mechanical Selectivity
Ejection nozzles discharge compressed air pulses to deflect identified contaminant flakes out of the falling material curtain. A tight co-ejection ratio relies on narrow pulse durations and precise physical alignment between optical detection zones and air jet orifices. Broad air blasts push adjacent virgin or clear flakes alongside the target discolored piece, inflating material loss.
Yield Impact
Financial recovery in secondary resin processing correlates directly with maintaining low yield loss during automated optical cleaning. When the co-ejection ratio rises from two parts acceptable material per target flake to four parts, overall process yield drops measurably over continuous production runs. Re-sorting the rejected stream recovers lost resin but adds electricity costs and mechanical equipment wear.
Sorting line operators adjust air pressure manifolds to preserve target purity without purging prime regrind into waste containers.
Threshold Limit
Operating boundaries for air valve actuation depend on flake size distribution and deck feed speed. Fine flakes below three millimeters destabilize air curtain aerodynamics, forcing operators to widen jet timing and accept a higher co-ejection ratio.