Meaning
Mechanical shut-off mechanisms in injection moulding screws prevent backflow of molten polymer into the screw flights during high-pressure injection. Proper check valve seating occurs when the non-return ring slides backward against the rear thrust washer under melt pressure, sealing the metering channels. Reliable sealing maintains consistent shot size and injection pressure across continuous production cycles.
Dynamic Response
Polymer viscosity and screw forward velocity dictate how rapidly the non-return ring seals against the rear seat. Highly viscous resins push the valve ring back instantly, whereas low-viscosity polymers can cause slight delays that permit resin backflow before full closure. Optimizing check valve seating requires matching screw rotational speed and back pressure so that the ring is positioned predictably before plastication ends.
Incorrect seat positioning creates fluctuations in part mass and sink marks in thick-walled sections.
Wear Behavior
Corrosive resins and abrasive mineral fillers degrade the precision contact surfaces of the valve tip and seat over time. As severe abrasive wear creates flow channels across the sealing face, check valve seating grows unreliable, allowing resin leakage during hold pressure.
Processing Impact
Molders track cushion stability to detect early valve leakage. Variations in hold pressure transfer compromise dimensional tolerance and part density.