Meaning
Mechanical pressure variables represent the internal load that attempts to push the two halves of a tool apart during the injection cycle. Calculating the cavity separating force requires multiplying the internal pressure by the projected area of the part and runner system. If this internal push exceeds the machine clamp capacity, the parting line opens and molten resin escapes.
Clamping Requirement
Tonnage settings must stay roughly twenty percent higher than the calculated peak load to ensure the tool remains shut under high packing pressures. Since cavity separating force peaks during the transition from velocity control to pressure control, the timing of this switch is essential for part consistency. Insufficient clamp force leads to dimensional instability and tool wear over long production runs.
A moulder often monitors this value to ensure the machine hydraulics can compensate for the resistance of the melt.
Projected Area
Measuring the shadow of the part onto a plane perpendicular to the direction of clamp movement provides the basis for load estimation. The cavity separating force increases proportionally with the size of the part, even if the wall thickness remains constant. Engineers use this value to select the appropriate press size for a specific tool.
Flash Prevention
Maintaining a tight seal at the parting line prevents the formation of thin plastic skins that require manual trimming. When the cavity separating force overcomes the machine hydraulics, the resulting gap allows resin to seep into the vents. This defect increases scrap rates and can damage the precision-ground faces of the mould.