Meaning
Geometric constraint principles establish the unique position of a rigid body in three dimensions by restricting all degrees of freedom. The use of 3-2-1 locating removes these six degrees of movement by placing three points on a primary plane, two points on a secondary plane and one point on a tertiary plane. Moulders rely on this logic to verify that shrinkage does not shift a critical feature relative to the machine interface.
This method ensures that parts remain repeatable during inspection or machining.
Spatial Constraint
Orientation of a workpiece relies on the selection of surfaces that resist rotation. While the primary plane defines the height and tilt, 3-2-1 locating uses the subsequent points to lock movement. Improper contact leads to false readings.
Fixture Design
Construction of jigs for secondary operations requires hard stops that match the theoretical datums of the part. Because 3-2-1 locating defines the contact geometry, designers must account for flash or parting line mismatch that could interfere with these landing sites. Clean surfaces are mandatory for the contact points to function.
Measurement Accuracy
Verification of a moulded component depends on the stability of the coordinate system. Without 3-2-1 locating, the alignment of a part on a coordinate measuring machine lacks a repeatable origin. This instability creates an apparent drift in dimensions that is actually an error in the setup.
These errors often lead to the rejection of good parts or the acceptance of bad ones during the final inspection stage.