Meaning
Systematic testing and validation process used to confirm that a specific batch of steel meets the requirements for building an injection mould. Success of a high-volume moulding program depends on tool steel qualification to ensure that the cavity surfaces can withstand the pressures and temperatures of production. The procedure checks for uniform hardness, cleanliness of the microstructure and the absence of internal voids.
This validation must occur before expensive machining time is invested in the block.
Material Integrity
Microscopic inspection reveals the distribution of carbides and the presence of non-metallic inclusions. During tool steel qualification, the steel is evaluated for its ability to take a mirror finish without showing pits or orange peel.
Thermal Performance
Conductivity measurements verify that the tool can transfer heat away from the molten plastic at the predicted rate. If the tool steel qualification shows a lower than expected thermal conductivity, the cycle time of the moulding process will increase. This shift affects the economics of the project by reducing the hourly output of the machine.
Hardness Resistance
Physical testing confirms that the heat treatment has reached the specified depth and level. A tool that fails the tool steel qualification may crack under the cyclical loading of the injection process or wear prematurely at the shut-off surfaces. Verifying these properties prevents the waste of labor on metal that will eventually fail.