Meaning
Mathematical expressions that describe the amount of light reflected and transmitted at the boundary between two media with different refractive indices. Optical performance of polymer lenses is calculated using fresnels equations to determine loss from surface reflection. These formulas account for the angle of incidence and the polarization state of the incoming light.
Boundary Interaction
Reflection occurs because the electromagnetic field of the light must satisfy continuity conditions at the interface of the resin and the air. When the fresnels equations predict high reflection at steep angles, the light available for the primary function of the lens decreases. This effect is most pronounced in high-index materials where the contrast with air is greater.
The total energy is conserved, meaning any energy not reflected must be transmitted into the second medium or absorbed by the material itself. Because absorption is negligible in high-quality optical polymers, the focus remains on the ratio of reflection to transmission.
Loss Calculation
Total light throughput is limited by the number of surfaces in an optical assembly. For a standard piece of clear plastic, the fresnels equations show that approximately four percent of light is lost at each air-to-material transition. Moulders use this value to specify the requirements for anti-reflective coatings.
Variation Influence
Refractive index drift during a production run changes the reflection profile of the part. If the density of the polymer fluctuates due to pressure variations in the mould cavity, the fresnels equations will yield slightly different results. Monitoring these values ensures that the optical specifications of the finished part remain within the design limits.