Meaning
Concentration of individual polymer molecules spanning the amorphous regions between adjacent crystalline lamellae determines long-term mechanical strength, stress crack resistance, and toughness in semi-crystalline polymers. Variations in tie-chain density dictate slow crack growth resistance, environmental stress crack performance, and impact resistance in polyethylene and polypropylene components. The parameter applies strictly to semi-crystalline thermoplastics containing co-existing amorphous and crystalline phases, and holds no meaning for fully amorphous polymers.
Stress Resistance
Molecular chains that tie adjacent crystalline lamellae together transmit applied mechanical loads evenly across the amorphous phase. Low numbers of interconnecting chains allow inter-lamellar separation under sustained tensile stress, leading to premature brittle failure. High tie-chain density suppresses slow crack growth in high-density polyethylene pipe compounds exposed to internal pressure over long periods.
Resin manufacturers synthesize bimodal molecular weight resins to maximize long-chain concentration and elevate stress crack resistance.
Moulding Effects
Rapid cooling in cold mold cavities shortens crystallization time, trapping polymer chains in amorphous entanglements rather than allowing them to fold into lamellae. Quenching increases effective tie-chain density, improving impact toughness and stress crack resistance in molded parts. Slow cooling permits extensive chain folding, reducing inter-crystalline links and making the material more prone to brittle fracture under stress.
Injection molders adjust mold temperature settings to optimize mechanical toughness against cooling cycle time demands.
Regrind Impact
Multiple heat histories during recycling cause chain scission that systematically reduces average polymer molecular weight. Thermal degradation selectively cleaves long polymer chains, decreasing tie-chain density in reprocessed resins. Parts molded with high regrind content exhibit reduced environmental stress crack resistance despite displaying unchanged short-term tensile yield strength.