Meaning
Autocatalytic degradation mechanisms driven by combined heat and oxygen exposure alter the chemical structure, molecular weight and physical characteristics of organic polymers. In plastics processing, compounding and end-use qualification, thermo-oxidation causes polymer chain scission, cross-linking, surface discoloration, embrittlement and off-gas generation. The process begins with the formation of free radicals in the molten or solid polymer matrix, which propagate into hydroperoxides through oxygen uptake.
The analytical boundaries of the condition stop where pure thermal cracking occurs in inert environments without atmospheric oxygen present.
Degradation Mechanism
Mechanical shear and thermal stress within the processing equipment split covalent carbon bonds along the polymer backbone, producing reactive alkyl free radicals. Oxygen molecules absorb into the polymer mass, reacting with these radicals to generate active peroxy radicals that extract hydrogen atoms from neighbouring polymer chains. This reaction sequence produces unstable hydroperoxides that split into alkoxy and hydroxyl radicals, causing an autocatalytic multiplication of radical species.
Chain scission dominates in polypropylene, leading to rapid reductions in molecular weight and uncontrolled increases in melt flow rate. Polyethylene often undergoes cross-linking reactions under low oxygen concentrations, generating gel clusters that plug melt-blown dies and mar injection-moulded surface finishes.
Moulding Defects
Process instability emerges when oxidized polymer flows through hot runner systems or plasticizing injection cylinders. Degraded resins exhibit sudden drop-offs in melt strength, inducing bubble instabilities in film extrusion lines and uncontrolled jetting inside injection tool cavities. Brown or yellow resin streaks form inside moulded parts when degraded material deposits on hot screw surfaces and sloughs off into the forward flow stream.
Embrittlement from surface oxidation causes thin-walled living hinges and flexible snap-fits to fracture prematurely under dynamic mechanical stress. Yellowing indices elevate beyond aesthetic specification limits, forcing molders to reject clear or light-coloured interior trim components.
Additive Prevention
Protection against thermal-oxidative degradation requires carefully balanced stabilizer systems compounded into the raw resin. Primary antioxidants, such as sterically hindered phenols, donate hydrogen atoms to neutralize active peroxy radicals, breaking the propagation cycle. Secondary antioxidants, including phosphites and thioethers, target intermediate hydroperoxides, converting them into stable non-radical alcohols without generating new active sites.
Combining both additive chemistries provides synergistic protection that preserves melt integrity during multiple thermal cycles. Machine operators manage this risk by lowering barrel heats during cycle interruptions and clearing stagnant melt from hot runners using stable purging compounds. Preventing thermo-oxidation preserves mechanical strength and extends the operational lifespan of finished plastic components.