Meaning
Physical state where a liquid remains in a fluid condition even after its temperature has dropped below its normal freezing or crystallization point. In polymer processing, supercooling occurs when the molten resin is cooled so rapidly that the chains do not have sufficient time to organize into a crystal lattice. This phenomenon creates a thermodynamic driving force that determines the rate and type of crystallization that eventually takes place.
Nucleation Density
Degree of thermal suppression influences how many crystal growth sites form within the melt.
Processing Window
Temperature control during the cooling stage must account for the lag between the melting point and the actual crystallization onset. Because polymers require supercooling to trigger the solid-state transition, the mould must be held at a temperature markedly lower than the material’s peak melting temperature. If the mould is too warm, the material may never reach the required level of thermal suppression to solidify within an economical cycle time.
Dimensional Stability
Residual energy trapped in the amorphous regions of a supercooled part can cause problems later. If a part is ejected before crystallization is complete, it may undergo secondary crystallization or post-moulding shrinkage as it reaches room temperature. This effect is particularly pronounced in materials with low glass transition temperatures, where the polymer chains retain enough mobility to continue reorganizing long after the moulding cycle has finished.