Meaning
Material separation workflows segregate post-industrial and post-consumer polymer waste into single-polymer streams prior to re-granulation. In plastics recycling and regrind processing, scrap sorting prevents cross-contamination between incompatible resins like polypropylene and polyethylene terephthalate. Automated optical and near-infrared sensors detect chemical signatures on conveyor lines to trigger air jets that deflect target polymers into dedicated collection bins.
The workflow stops being effective when multi-layer film structures or heavily painted parts obscure base resin signatures.
Spectroscopic Identification
Near-infrared spectroscopy identifies resin types by analyzing molecular absorption bands of polymer chains passing beneath optical sensors. Implementing automated scrap sorting behind molding lines ensures that purge material and runner systems return directly to virgin resin blends without contamination. Dark black polymers containing carbon black pigments absorb infrared light entirely, rendering spectroscopic classification ineffective.
Density Separation
Sink-float tanks utilize fluid density differentials to separate olefin polymers from heavier engineering resins. Polyolefin flakes float on water while polycarbonates and acetals sink to the bottom of processing tanks. Water retention on wet regrind requires thermal drying steps before material enters extrusion hoppers.
Contamination Boundary
Cross-contamination level exceeding half a percent by weight degrades mechanical properties of re-compounded resins. Melt flow rate variations emerge when regrind batches contain mixed melt index grades of the same resin family.