Meaning
Quality control step confirming that the residual moisture in a polymer feed has reached the specific threshold required for hydrolytic stability ensures the structural integrity of the finished part. Many engineering plastics absorb water from the air, and failing to remove this moisture leads to chemical breakdown during melting. Proper resin drying verification involves taking a sample directly from the hopper just before it enters the throat of the press.
Desiccant Performance
Air circulating through the drying bed must have a dew point low enough to pull moisture out of the pellets.
Testing Protocol
Laboratory equipment such as a moisture analyzer uses heat to drive off the water and weigh the loss. This resin drying verification process provides a precise percentage of moisture content that can be compared against the material datasheet. A typical limit for polycarbonate is below zero point zero two percent by weight.
Defect Prevention
Splay marks and silver streaks on the surface of a part are visible signs that the drying was insufficient. These defects are more than just cosmetic problems, as the water molecules have reacted with the polymer to shorten the chains. This reaction reduces the impact strength of the plastic.
Regular resin drying verification stops the production of brittle parts and reduces the financial risk of a product recall.