Meaning
High-precision coordinate measurement method that aligns data across different setups or machines defines this advanced inspection technique. Toolmakers use relocation metrology to measure mould inserts before and after machining or texturing without losing the reference coordinate system. This technique relies on physical datum spheres or precision tooling balls to establish a repeatable coordinate frame, ensuring that the measurement results remain accurate regardless of where the part is positioned.
Reference Alignment
Physical datums must be fixed to the insert or fixture to serve as permanent reference points during the entire manufacturing sequence. By scanning these spheres or pockets in each setup, the measurement software aligns the coordinate systems of different machines, such as milling centres, EDM machines, and coordinate measuring machines. This alignment eliminates the cumulative errors that arise when re-zeroing the workpiece manually on each different machine tool.
Process Precision
Sub-micron tolerances required for micro-moulding or multi-cavity interchangeable tooling demand accuracy that standard setup procedures cannot achieve. Using this measurement process allows toolmakers to inspect worn cavities and machine them back to the original nominal dimensions with high accuracy. The ability to verify and adjust tool dimensions across multiple setups reduces the risk of cavity-to-cavity variation and ensures that replacement inserts fit perfectly into the mould frame.
Inspection Automation
Integrating these reference points into automated robotic lines allows for inline measurement and adjustment without human intervention. The robot places the workpiece in the measuring cell, where the relocation system identifies the coordinate system and verifies the machined features against the CAD model. If any wear or deviation is detected, the corrective offsets are sent directly to the machine tool for the next machining cycle.
This closed-loop system reduces the dependency on highly skilled operators and maintains tight tolerances across high-volume tooling runs. This level of control is particularly important when manufacturing complex multi-component products where even a micro-scale shift in insert alignment can cause functional failures or visual assembly gaps.