Meaning
Material characterization methods evaluate polymer specific volume as a function of temperature and hydrostatic pressure across solid and molten states. PVT dilatometry measures compressibility and thermal expansion, producing state diagrams required for accurate injection moulding simulation. Measurements are conducted using piston-die or fluid-displacement dilatometers under isothermal or isobaric cooling conditions.
Raw polymer datasheets often present single-point density values, whereas PVT dilatometry delivers the comprehensive equation-of-state data necessary for predicting volumetric shrinkage.
Measurement Technique
Controlled testing applies pressure steps up to two thousand bar while recording volume changes across a wide temperature spectrum. PVT dilatometry captures both amorphous glass transitions and semi-crystalline phase changes during cooling.
Material Response
Specific volume drops sharply during crystallization in semi-crystalline polymers, whereas amorphous polymers display a gradual slope change at the glass transition. Utilizing PVT dilatometry allows polymer scientists to quantify structural compaction under varying cooling rates and pressure levels. Virgin resins demonstrate predictable, repeatable PVT curves, while regrind blends often exhibit modified specific volume shifts due to thermal degradation and contaminant introduction.
These volumetric datasets define how much extra material must be packed into a cavity to compensate for thermal contraction.
Moulding Application
Simulation software uses volumetric data to optimize packing pressure magnitude and duration, directly influencing final part dimensions and sink mark formation. Process engineers rely on these curves to calculate volumetric shrinkage and adjust cavity sizing during tool manufacture. Accurate equation-of-state data from PVT dilatometry forms the baseline for predicting volumetric shrinkage in injection moulded tools.