Meaning
Two-dimensional shadow projection of all mould cavities and runner systems onto the parting line plane defines the surface exposed to parting force. Calculation of projected area determines the minimum clamping force required to keep mould halves closed against internal cavity pressure. Multiplying this area by peak cavity pressure establishes the tonnage threshold necessary to prevent parting line separation.
Complex part geometry with side cores or stepped parting lines requires careful area calculations along the main press axis. Incorrect area estimates lead to equipment selection errors, tool damage and part flash.
Tonnage Requirement
Press sizing depends directly on total cavity surface area combined with maximum internal melt pressure. Larger projected area dimensions demand higher clamp tonnage machines to maintain tool seal integrity during injection. High-viscosity polymers require elevated injection pressures, which increases the required clamping force per square centimetre.
Operating a mould on a press with inadequate clamp tonnage creates flash and dimensional instability across parts.
Cavity Distribution
Balancing layout geometry across the platen ensures even distribution of force during high-pressure packing. Asymmetrical projected area arrangements cause platen deflection, tool wear and localized parting line opening. Tool designers center cavities relative to machine tie-bars to balance hydraulic loads.
Proper spacing prevents uneven flash and extends tool operational life.
Core Action
Moving side cores and angled slide inserts alter the effective surface area reacting against clamp pressure. Mechanical locks must absorb the vector forces generated across slide face projected area during injection. Insufficient lock angle or mechanical support permits core movement, altering part dimensions.
Calculating directional force components ensures slides remain rigid under peak packing pressures.