Meaning
Rheological resistance dictates how readily molten bisphenol A polymers flow through runners and cavities during processing. Moulders must carefully manage polycarbonate viscosity because of its high sensitivity to temperature and low sensitivity to shear rate. This high viscosity requires robust melt delivery systems and high processing temperatures to achieve complete cavity filling.
Melt Behavior
Unlike shear-thinning resins, polycarbonate viscosity remains relatively high even under fast injection speeds. This characteristic puts high demands on the mechanical components of the injection moulding machine. Designers must use wider gates and thicker flow channels to accommodate the stiffer flow behavior.
Temperature Influence
Thermal control is the primary method for adjusting this resin’s flowability in production. Increasing the melt temperature lowers the polycarbonate viscosity, enabling the polymer to fill thin-walled sections without excessive pressure. However, running at high temperatures can cause thermal degradation if the residence time is too long.
When thermal degradation occurs, the polymer chains break, leading to a drastic reduction in the mechanical strength and impact resistance of the final moulded part.
Part Specification
Moulded parts with tight tolerances require stable raw material properties. Inconsistent polycarbonate viscosity alters the filling behavior, which leads to dimensional variation across production lots.