Meaning
Dimensional variation across a localized section of an injection molded part surface defines pocket floor flatness, governing the planarity of recessed interior zones. Tooling designers set this geometric tolerance within the cavity layout phase to manage polymer shrinkage and warpage during cooling. Uncontrolled cooling rates cause localized sink marks or differential shrinkage, which leads to part rejection during automated assembly.
Virgin polymer compounds maintain predictable volumetric shrinkage, whereas regrind incorporation shifts melt density and increases planar deviation across identical tool geometries.
Tooling Geometry
High injection pressures and uneven thermal transfer within deep cavity inserts restrict uniform volumetric contraction. Thermoplastic resins undergo volumetric reduction from melt temperature to ambient conditions, creating internal stresses that distort thin sections. Cavity cooling channels positioned too far from deep recesses generate thermal gradients across the resin boundary.
Resin Shrinkage
Semicrystalline polymers exhibit higher volumetric shrinkage than amorphous materials, magnifying planar distortion within confined tool geometries. Processor technicians adjust barrel temperatures and packing pressures to compensate for material specific crystallization rates. Datasheet shrinkage values derived from standardized test bars rarely match the planar tolerances achieved in complex production tooling.
Surface Tolerance
Coordinate measuring machines evaluate planar deviation by recording multiple data points across the recessed boundary. Quality inspectors compare measured profiles against computer aided design models to verify compliance with contractual part specifications. Part level tolerances remain tighter than material level test data due to localized shear heating and gate location constraints.