Meaning
Dissipation of applied holding force through cooling runner networks, narrow gates, and solidifying plastic wall sections defines packing pressure absorption. The rate governs how efficiently hydraulic or electric machine pack pressures transfer into the freezing part cavity to compensate for volumetric resin shrinkage. The measurement ceases to apply once the feed gate freezes solid, as hydraulic continuity between the injection unit and the part cavity is broken.
Flow Resistance
Viscous resistance within thin-walled runners absorbs high amounts of machine holding pressure before the melt reaches critical part geometries. Polymer melt viscosity climbs rapidly as the outer skin solidifies, increasing shear stress and dropping the effective packing pressure gradient. Thick wall sections located far from the gate experience poor pressure transfer because upstream narrow restrictions choke off incoming flow.
Balancing runner diameters prevents premature freezing, enabling consistent pressure absorption across multi-cavity mould layouts.
Solidification Dynamics
Progressive cooling from the cold mould steel inward continuously reduces the fluid core area capable of transmitting hydrostatic pressure. Rapid cooling cycles accelerate packing pressure absorption within thin part sections, isolating adjacent thick bosses or ribs from continuous hold packing. This localized pressure decay results in visual sink marks, internal vacuum voids, and erratic part weights across production lots.
Lowering tool temperatures worsens this issue by accelerating freeze times, cutting short the packing window.
Process Verification
In-cavity pressure transducers record the exact hydraulic energy transmitted through the melt pool, measuring packing pressure absorption directly on the factory floor. Machine hydraulic gauges show constant machine effort, while cavity sensors frequently show sharp pressure drops due to gate freeze. Adding recycled regrind can drop the melt flow index, which elevates pressure absorption rates and starves distant cavity sections.
Tracking absorption rates remains vital to maintaining tight part weight tolerances, stable dimensional profiles, and structural integrity across complex injection components.