Meaning
Unintended variation in the heat profile of a polymer stream occurs when the thermal energy supplied by the barrel heaters and screw shear deviates from the set point over time. Monitoring melt temperature drift is necessary because the viscosity of the resin is highly dependent on its thermal state. Consistent processing relies on keeping this variable within a narrow range throughout a production run.
Thermal Equilibrium
Stability in the barrel depends on a balance between the conduction from heater bands and the convection from the rotating screw. Factors causing melt temperature drift include changes in the ambient air temperature of the factory or fluctuations in the moisture content of the incoming pellets.
Cycle Stability
Long production shifts often see gradual changes in heat as the machinery reaches a steady state of operation. If melt temperature drift is not corrected, the part dimensions will change as the cooling rate of the plastic fluctuates. Regrind materials are particularly susceptible to these shifts because their irregular particle sizes change the friction inside the barrel.
Operators use melt probes or infrared sensors to detect these trends before they result in rejected parts.
Viscosity Shift
Fluidity of the molten plastic increases as the temperature rises, leading to potential flash or overpacking. Reducing the drift ensures that the pressure needed to fill the mold remains constant.