Meaning
Microstructural dimensional dispersion denotes the statistical variation in thickness exhibited by folded polymer chain crystallites, known as lamellae, within semi-crystalline solid domains. Characterised through differential scanning calorimetry or small-angle X-ray scattering, lamellar thickness distribution dictates the melting range, solid-state modulus, yield behaviour, and optical clarity of moulded plastics. The parameter governs crystallisation kinetics and structural integrity across polyolefins, polyamides, and linear polyesters.
It ceases to apply to amorphous thermoplastics, which lack folded-chain crystal structures entirely, or to the isotropic liquid phase above the equilibrium melting point.
Thermodynamic Foundation
Chain folding during polymer solidification produces flat crystalline plates whose thickness reflects local undercooling, chain architecture, and molecular weight distribution. A polymer with broad short-chain branching variations produces a wide distribution of lamellar thicknesses because branched segments cannot enter the crystal lattice and terminate fold growth early. Thicker lamellae possess higher thermodynamic stability, melting at elevated temperatures according to the Gibbs-Thomson equation.
Thin crystallites melt at lower temperatures, broadening the transition interval observed on heat-flow thermograms during thermal analysis.
Moulding Influence
Cooling rates within the injection mould govern how lamellae grow from the molten core to the frozen skin. Rapid thermal quenching against cold steel walls prevents chains from organising into thick lamellae, producing a narrow distribution of thin crystals that reduces yield strength near part surfaces. Slower cooling within thick core sections grants macromolecular chains time to assemble into thicker, more perfect lamellae, raising local modulus and density.
Uneven cooling creates through-thickness gradients in lamellar thickness, generating anisotropic internal stresses that drive post-moulding warpage and dimensional instability across parts.
Structural Impact
Mechanical failure mechanisms directly reflect the proportion of thick to thin lamellae within the crystalline network. Thicker lamellae withstand higher tensile yield forces, but an absence of thin lamellae interconnected by tie molecules degrades resistance to brittle fracture under dynamic impact loading. Environmental stress cracking resistance improves when a broad lamellar thickness distribution contains abundant interlamellar tie chains that bridge adjacent crystal blocks under mechanical strain.
Regrind usage shifts this distribution toward thinner crystallites through molecular weight degradation, shortening average chain lengths and compromising long-term creep performance under steady operational loads.