Meaning
Cone-in-cone internal hopper flow deflectors modify gravity-driven particle velocity profiles inside bulk material handling vessels. Suspended conical baffles placed directly above hopper exit openings rechannel bulk material flow, forcing stagnant peripheral zones to move at the same rate as the central core stream. In plastic processing plants, a Johanson insert converts funnel-flow bins into mass-flow storage systems without requiring replacement of the main vessel cone.
The device operates up to the structural boundary where extreme material cohesion exceeds the passive mechanical clearance of the inner cone channel.
Flow Correction
Funnel-flow hoppers develop a central rat-hole where fast-moving material discharges first, leaving stagnant resin along outer walls. Positioned above the discharge outlet, an inner inverted cone directs part of the descending bed outward toward vessel walls while allowing inner streams to pass through a central aperture. Equalizing downward velocity across the vessel cross section prevents first-in, last-out inventory degradation.
Blended regrind and virgin resin mixtures descend uniformly, preventing composition shifts during long production runs.
Stress Distribution
Internal cone placement reduces peak compaction pressures acting on resin particles near the discharge outlet. Lower compaction stress prevents soft or tacky plastic pellets from consolidating into solid masses during extended storage periods.
Segregation Control
Eliminating preferential flow paths prevents high-density additives and fine regrind dust from separating from larger virgin pellets during hopper drawdown cycles. Uniform material mass flow maintains steady bulk density at the extruder inlet, stabilizing shot weight in injection molding operations.