Meaning
International standardization documents define physical calibration procedures for non-contact optical surface profiling instruments. The ISO 25178 603 standard specifies nominal characteristics and calibration artifacts for phase shifting interferometry systems. Tooling engineers use these standardized protocols to verify optical profiler accuracy on polished mold surfaces.
Calibration parameters defined within the document establish baseline measurement uncertainty limits across optical metrology platforms.
Calibration Requirement
Interferometric height measurement accuracy depends on calibrated reference mirrors and precise phase shifting mechanics. Standardized calibration artifacts verify height linearity across step height standards ranging from ten nanometers to several micrometers. Phase shifting interferometers measuring polished tool steel must maintain height fidelity across varying surface reflectivity levels.
Optical phase errors caused by material transitions reduce measurement repeatability.
Tooling Application
Surface finish verification of optical-grade injection mold inserts requires strict adherence to international calibration standards. Acrylic and polycarbonate lens molds require cavity surface roughness Ra values below five nanometers to prevent optical haze in molded parts. Adherence to ISO 25178 603 ensures that optical profilometers accurately measure cavity mirror finishes before molding starts.
Processing parameters like mould temperature alter resin replication, but uncalibrated optical profilers misattribute surface defects to melt processing rather than tool geometry. Regrind incorporation in non-optical backing parts alters surface gloss, requiring verified profilometer calibration to distinguish resin blend variations from tool wear.
Standard Boundary
Calibration procedures specified in this standard apply exclusively to phase shifting interferometers and do not govern stylus profilers. Surface slope limitations inherent to interferometry restrict valid measurements on steep cavity draft angles. ISO 25178 603 defines calibration limits for planar and shallow surface geometries.