Meaning
Increases the mechanical energy absorption of polyolefin resins by dissipating localized stresses through finely dispersed rubber domains. The impact copolymer rubber fraction represents the volume or mass percentage of ethylene-propylene rubber synthesized in the second stage of a dual-reactor polypropylene polymerization process. This elastomeric phase interrupts crack propagation in cold environments where neat homopolymer polypropylene fails in a brittle manner.
The boundary of this term excludes external elastomeric modifiers added during secondary compounding steps.
Phase Structure
In-situ polymerization creates microscopic rubber domains distributed throughout the semi-crystalline matrix. Adjusting reaction conditions controls the impact copolymer rubber fraction along with its ethylene content and intrinsic viscosity. Interfacial adhesion between the rubber particles and matrix determines notch sensitivity under high-speed impact loading.
Proper domain size distribution ensures optical clarity remains acceptable while maintaining impact strength.
Processing Behavior
Varying the rubber content modifies melt elasticity and shear thinning behavior in injection molding machines. When the impact copolymer rubber fraction exceeds target parameters, high melt viscosity leads to extended fill times and higher mold cavity pressures. Molders observe increased die swell in extrusion and potential stress whitening in molded parts subjected to mechanical bending.
Higher rubber content also increases cycle time due to slower cooling rates in thick-walled sections. Controlling reactor ratio controls prevents molding defects and holds part dimensions within tolerance.
Performance Limit
Excessive rubber incorporation decreases tensile yield strength and flexural modulus. Maintaining an optimal impact copolymer rubber fraction balances stiffness against low-temperature impact performance in automotive applications.